Skip to content

Kidoom Class 15 metal bobbins, 28 pcs

Twenty-eight standard class 15 metal bobbins in galvanized steel, stated at 0.80 inch outer diameter and 0.41 inch wide, with a transparent storage box.

Kidoom 28 metal class 15 sewing machine bobbins in a clear box

Kidoom Class 15 metal bobbins, 28 pcs

Twenty-eight standard class 15 metal bobbins in galvanized steel, stated at 0.80 inch outer diameter and 0.41 inch wide, with a transparent storage box.

Type
Class 15, metal
Count
28 + storage box
Size
0.80 in outer diameter, 0.25 in inner, 0.41 in wide (listing)
Material
Polished, galvanized steel
Fit
Most household and older machines using metal class 15 (listing)
  • Metal bobbins for machines designed for them, at a low price
  • Full dimensions published
  • Not for drop-in machines designed for plastic bobbins
8.5/10
Check price on Amazon

Specifications

Type
Class 15, metal
Count
28 + storage box
Size
0.80 in outer diameter, 0.25 in inner, 0.41 in wide (listing)
Material
Polished, galvanized steel
Fit
Most household and older machines using metal class 15 (listing)
Photo : Michael Kater, Unsplash

What follows is the Amazon.com listing’s specification, cited as such, and our reading of it.

What the listing states. 28 standard class 15 metal bobbins with a transparent box, made of polished, galvanized steel, with a stated outer diameter of 0.80 inch, inner diameter of 0.25 inch and outer width of 0.41 inch. Compatible with most household and older machines such as Singer, Brother, Janome and others — with an invitation to check the dimensions first.

Metal or plastic: the manual decides. Machines with a removable bobbin case, often front-loading, were usually designed for metal bobbins; most modern drop-in machines are designed for plastic. A metal bobbin in a plastic-bobbin machine can change the tension and confuse a bobbin sensor. See drop-in or front-loading bobbin.

Why the published dimensions help. Bobbins of the “same” class differ: this pack states 0.41 inch wide, while the plastic Eoehro pack states 0.45 inch. Measure your original before buying a stock.

Owner record. Nearly 800 ratings on Amazon.com averaging above four and a half stars.

Compare with Singer’s metal class 15 on our bobbins and cases page.

What sewers ask us

Which machines need metal bobbins?

Many older and front-loading machines with a removable bobbin case. Your manual states it.

Can I use metal bobbins in a drop-in machine?

Only if the manual allows it. Many drop-in machines are designed for plastic and the bobbin sensor or tension can be affected.

Are they the same height as plastic class 15?

The listing states 0.41 inch wide; plastic packs we list state up to 0.45 inch. Small differences matter.

Will they rust?

The listing states a galvanized, rust-resistant finish.

Our score

8.5/ 10

The recorded price, among bobbins & cases

A reference exists on Amazon.com. Listed is not the same as in stock — availability changes daily.

Details checked on November 4, 2026.

Sources

Specifications: the manufacturer sheet for bobbins & cases and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.

How we assess these bobbins & cases

All bobbins & cases