Skip to content

SUYUN WELL 1/4 in snap-on foot with guide

A stainless steel 1/4-inch snap-on foot with an edge guide, reference markings on three sides and a single-hole sole for flat feeding, with six sewing clips.

SUYUN WELL quarter inch presser foot with edge guide

SUYUN WELL 1/4 in snap-on foot with guide

A stainless steel 1/4-inch snap-on foot with an edge guide, reference markings on three sides and a single-hole sole for flat feeding, with six sewing clips.

Type
1/4 in patchwork foot with edge guide
Markings
Reference marks on three sides
Sole
Single-hole, flat bottom
Material
Stainless steel
Extras
6 sewing clips
Fits
Most low-shank machines: Singer, Brother, Janome, Kenmore and others (listing)
  • Edge guide makes accurate quarter-inch seams automatic
  • Single-hole sole stops fabric being pushed into the plate
  • Single hole means straight stitch only — never select zigzag
7.9/10
Check price on Amazon

Specifications

Type
1/4 in patchwork foot with edge guide
Markings
Reference marks on three sides
Sole
Single-hole, flat bottom
Material
Stainless steel
Extras
6 sewing clips
Fits
Most low-shank machines: Singer, Brother, Janome, Kenmore and others (listing)
Photo : T, Unsplash

What follows is the Amazon.com listing’s specification, cited as such, and our reading of it.

What the listing states. A 1/4-inch snap-on foot in stainless steel with an edge guide, reference markings on three sides and a single-hole flat sole that prevents fabric sinking and keeps contact with the feed dogs, plus six sewing clips. For patchwork, quilting and piecing on most low-shank machines — Singer, Brother, Janome, Kenmore and others.

Why quilters swear by quarter-inch feet. Quilt patterns assume an exact 1/4-inch seam. A few hundredths of an inch off on every seam, multiplied across a block, and points no longer meet. An edge guide makes the width automatic. See understanding seam allowance.

The single-hole sole. It supports the fabric around the needle, so thin cotton is not pushed down into the plate. The consequence: straight stitch only, center needle position. A zigzag will strike the foot.

Test first. Sew a seam and measure it against a ruler. Machines differ slightly; adjust the needle position if yours allows.

Owner record. About forty ratings on Amazon.com averaging above four stars.

See our quilting machines and presser feet pages.

What sewers ask us

Why does a single-hole foot matter?

The small hole supports the fabric around the needle, so thin quilting cotton is not pushed down at the start of a seam.

Can I zigzag with it?

No. A single-hole foot is for straight stitch only; a zigzag will strike the foot.

Is it accurate?

Test a seam against a ruler; machines differ slightly in needle position.

What do the three-side markings do?

They show a quarter inch before and after the needle, for starting, stopping and pivoting at corners.

Our score

7.9/ 10

The recorded price, among presser feet

A reference exists on Amazon.com. Listed is not the same as in stock — availability changes daily.

Details checked on November 4, 2026.

Sources

Specifications: the manufacturer sheet for presser feet and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.

How we assess these presser feet

All presser feet