Skip to content

Brother SA156 bobbins, 10-pack

Ten genuine Brother SA156 clear plastic bobbins, 11.5 mm high, with a winding notch, designed for Brother sewing and embroidery machines.

Brother SA156 clear plastic bobbins, 10-pack

Brother SA156 bobbins, 10-pack

Ten genuine Brother SA156 clear plastic bobbins, 11.5 mm high, with a winding notch, designed for Brother sewing and embroidery machines.

Part number
SA156
Count
10
Material
Clear plastic, reusable
Height
11.5 mm (listing title)
Feature
Security notch for consistent winding
Designed for
Brother sewing and embroidery machines
  • Genuine Brother part — the safe choice for Brother machines
  • More than 12,000 owner ratings averaging close to five stars
  • Costs more per bobbin than generic packs
8.7/10
Check price on Amazon

Specifications

Part number
SA156
Count
10
Material
Clear plastic, reusable
Height
11.5 mm (listing title)
Feature
Security notch for consistent winding
Designed for
Brother sewing and embroidery machines
Photo : Michael Kater, Unsplash

What follows is the Amazon.com listing’s specification, cited as such, and our reading of it.

What Brother states. Ten SA156 bobbins in clear plastic, 11.5 mm high, reusable, with a security notch for consistent winding, “specially designed and manufactured for optimal results with Brother sewing and embroidery machines”. Useful for pre-winding embroidery bobbin thread and keeping colors ready.

Why the bobbin matters more than it looks. Bobbins that look identical can differ by a fraction of a millimeter in height or in how domed their sides are, and that is enough to change how the bobbin turns in its case. The result is a tension fault that looks like a machine problem. See why there are different bobbin classes.

Plastic versus metal. Most Brother drop-in machines are designed for plastic bobbins; a metal bobbin can upset the tension and the bobbin sensor on some models. Follow your manual.

Against generic packs. Packs such as Eoehro’s 50 bobbins list class 15 sizing; their stated height differs slightly from Brother’s. If a generic bobbin causes looping, go back to genuine.

Owner record. More than 12,000 ratings on Amazon.com averaging close to five stars.

Wind bobbins evenly — see how to wind a bobbin evenly — and compare other packs on our bobbins and cases page.

What sewers ask us

Is SA156 the same as class 15?

SA156 is Brother's class 15 size A plastic bobbin. Generic class 15 bobbins often fit, but heights vary slightly between makers.

Can I use metal bobbins in my Brother?

Only if the manual says so. Most Brother drop-in machines are designed for plastic bobbins.

What is the notch for?

It catches the thread end when you start winding, so the bobbin winds evenly.

Why buy genuine?

A bobbin a fraction too tall or too short turns unevenly and causes tension faults that look like a machine problem.

Our score

8.7/ 10

The recorded price, among bobbins & cases

A reference exists on Amazon.com. Listed is not the same as in stock — availability changes daily.

Details checked on November 4, 2026.

Sources

Specifications: the manufacturer sheet for bobbins & cases and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.

How we assess these bobbins & cases

All bobbins & cases