Skip to content

Fiskars 6 in sewing gauge

A 6-inch plastic sewing gauge whose marker presses and slides to lock at 1/8-inch increments, with a built-in corner turner and English and metric scales that will not wear off.

Fiskars 6 inch sewing gauge with sliding marker

Fiskars 6 in sewing gauge

A 6-inch plastic sewing gauge whose marker presses and slides to lock at 1/8-inch increments, with a built-in corner turner and English and metric scales that will not wear off.

Length
6 in
Marker
Press-and-slide, locks at 1/8 in increments
Extra
Built-in corner turner
Scales
English and metric, wear-resistant
Material
Durable plastic
  • Locks at a measurement instead of sliding loose
  • Corner turner built in
  • Plastic rather than metal
8.5/10
Check price on Amazon

Specifications

Length
6 in
Marker
Press-and-slide, locks at 1/8 in increments
Extra
Built-in corner turner
Scales
English and metric, wear-resistant
Material
Durable plastic
Photo : mk. s, Unsplash

What follows is the Amazon.com listing’s specification, cited as such, and our reading of it.

What Fiskars states. A 6-inch sewing gauge that presses and slides to lock at 1/8-inch increments for accurate hems, seam allowances and buttonholes, a built-in corner turner, easy-to-read English and metric measurements that will not wear off, in durable plastic.

What a gauge does that a ruler does not. It repeats one measurement — the hem depth, the gap between buttonholes, a pleat width — dozens of times without re-reading the scale. The locking marker is the point: on cheap gauges the slider creeps and the measurement drifts.

The corner turner. The pointed end pushes out collar and cuff corners after turning, more gently than scissors.

Plastic versus metal. At the ironing board, a metal gauge such as the Prym seam gauge can be pressed over without melting. This one is for the cutting and sewing table.

Owner record. About 400 ratings on Amazon.com averaging above four and a half stars.

See how to sew a hem and our measuring and marking page.

What sewers ask us

What is a sewing gauge for?

Repeating one measurement many times: hem depth, seam allowance, buttonhole spacing, pleat width.

Why does locking matter?

Sliding markers on cheap gauges creep, and a hem marked at 1 1/4 inches drifts to 1 3/8.

What is the corner turner?

A pointed end for pushing out the corners of collars and cuffs after turning.

Fiskars or Prym metal gauge?

The Prym is metal and heat-safe at the iron; the Fiskars locks at fixed increments.

Our score

8.5/ 10

The recorded price, among measuring & marking

A reference exists on Amazon.com. Listed is not the same as in stock — availability changes daily.

Details checked on November 4, 2026.

Sources

Specifications: the manufacturer sheet for measuring & marking and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.

How we assess these measuring & marking

All measuring & marking