A regular sewing machine finishes seams well. A serger is faster, but these methods give clean, durable seams on every fabric.
Zigzag
The simplest finish.
- Set a medium zigzag: width about 2–3 mm, length about 2–2.5 mm.
- Sew along the raw edge, with the right swing just off or on the edge.
- Finish each edge separately for pressed-open seams, or both together for seams pressed to one side.
Overcast stitch
Many machines have an overcast stitch that wraps the edge more like a serger. Use it with an overcast foot, which stops the edge curling. Computerized machines such as the Brother CS7000X include several.
Pinking
Pinking shears cut a zigzag edge that frays less. Fine on stable wovens that fray little, such as quilting cotton. Not for loose weaves.
French seam
For light and sheer fabric:
- Sew the seam wrong sides together, with a narrow allowance, about 1/4 inch.
- Trim it to about 1/8 inch and press.
- Fold right sides together, enclosing the edges, and press.
- Sew again, about 3/8 inch from the fold.
The raw edges are enclosed and invisible.
Flat-felled seam
For shirts, jeans and bags:
- Sew the seam, trim one allowance shorter.
- Fold the longer allowance over the shorter one.
- Press it flat to one side and topstitch it down.
Strong, flat and enclosed.
Hong Kong finish
For unlined jackets: bind each raw edge with a strip of bias fabric, sewn on and wrapped around. Neat and decorative.
Bound seam
Wrap the raw edges with bias tape — see the Mandala Crafts bias tape.
Turned and stitched
Fold each raw edge under about 1/8 inch and stitch it. Good on light wovens.
Choosing
- Quilting cotton: zigzag or pinking.
- Linen and loose weaves: zigzag, overcast or French seams.
- Sheer fabric: French seams.
- Denim and canvas: flat-felled.
- Knits: often none, or a zigzag.
- Unlined jackets: Hong Kong.
Press
Press the seam before and after finishing — see pressing versus ironing.
When a serger is worth it
If you sew a lot of garments or knits, a serger is faster — see do I need a serger and our sergers page.
What sewers ask us
Which is the easiest seam finish?
A zigzag stitch along each raw edge, or both edges together, with a medium width and length.
What is a French seam?
A seam sewn twice: first wrong sides together, then trimmed, folded and sewn right sides together, enclosing the raw edges.
Do I need to finish seams on knits?
Knits do not fray, so many knit seams can be left raw. A zigzag finish neatens them.
What is an overcast foot?
A presser foot with a small bar or guide that keeps the zigzag wrapped around the fabric edge so it does not curl.
Last reviewed