A zipper goes in neatly when the seam is prepared first and the foot can sew close to the teeth.
What you need
- A zipper foot, which lets the needle sew close to the teeth; an invisible zipper foot for invisible zippers. See presser feet.
- Basting tape or pins, or Wonder Clips.
- Interfacing strips along the seam allowances on light or stretchy fabric.
Centered zipper
The easiest method.
- Sew the seam below the zipper opening with a normal stitch; baste the opening closed with the longest stitch.
- Press the seam open.
- Place the zipper face down on the seam allowances, teeth centered on the seam. Pin or tape.
- With the zipper foot, sew down one side, across the bottom, and up the other — or sew both sides from bottom to top.
- Unpick the basting from the right side.
Lapped zipper
One fold covers the teeth — common on skirts and dresses.
- Press the seam allowances as for a centered zipper.
- Sew the left side close to the teeth.
- Fold the right side over to cover the teeth by about 1/8 inch and topstitch about 3/8 inch from the fold.
Invisible zipper
The zipper disappears into the seam.
- Do not sew the seam first.
- Press the zipper coils flat with a cool iron.
- Pin one side face down to the right side of the fabric, coil along the seam line.
- Sew with the invisible zipper foot, the coil in its groove, to the slider.
- Repeat on the other side.
- Close the zipper and sew the rest of the seam with a regular zipper foot.
Sewing past the slider
Stop with the needle down, lift the foot, slide the pull past the foot, lower and continue.
Sew both sides the same direction
Sewing one side up and the other down can make the zipper ripple. Sew both from bottom to top.
Zipper length
Use one at least as long as the opening. A coil zipper can be shortened: bar tack across the teeth and cut below — see how to replace a broken zipper.
Knits and light fabric
Fuse a strip of interfacing along the seam allowances first so the seam does not stretch.
Common problems
- Rippling: directions or stretched fabric.
- Teeth showing: sew closer, or lap more.
- Needle hitting the slider: move it out of the way.
Related
What sewers ask us
Which zipper method is easiest?
The centered zipper, with the seam basted closed first.
How do I sew past the slider?
Stop with the needle down, lift the foot, slide the pull past the foot, lower the foot and continue.
Do I need an invisible zipper foot?
For invisible zippers, yes. It holds the coil open so the needle sews right beside it.
Why does my zipper ripple?
The two sides were sewn in opposite directions, or the fabric stretched. Sew both from bottom to top and stabilize the seam.
Last reviewed