Check the slider before replacing the whole zipper. Many “broken” zippers only have a worn slider.
Is it the slider?
If the teeth separate behind the slider but are not damaged:
- Squeeze the slider gently with pliers to tighten it.
- Or replace the slider with one of the same size.
If teeth are missing or bent, or the tape is torn, replace the zipper.
Choose the replacement
- Same type: coil (nylon), metal, molded plastic or invisible.
- Same length: measure the teeth, not the tape. A longer coil zipper can be shortened.
- Separating or closed-end: jackets need separating zippers.
- Same weight: heavy metal for jeans and bags, light coil for dresses.
Remove the old zipper
- Photograph or note how it was sewn in: centered, lapped, fly or invisible.
- Unpick the stitching with a seam ripper, including waistband ends and facings that hold the top.
- Remove thread fragments and press the seam allowances.
Sew in the new one
- Pin or baste the zipper in exactly the old position. Wonder Clips or basting tape hold it without shifting.
- Attach a zipper foot, which lets the needle sew close to the teeth.
- Sew one side from bottom to top, close to the teeth.
- Sew the other side in the same direction, to avoid rippling.
- Sew across the bottom, avoiding the metal stop.
- Restitch facings and waistband ends.
See how to sew a zipper for each method.
Moving the slider
Partway down a side, stop with the needle down, lift the foot, and slide the zipper pull past the foot.
Jeans
Unpick the fly and the waistband ends, insert a metal jeans zipper, and resew the fly topstitching with a jeans needle — see jeans needles.
Jackets
Separating zippers usually sit between the facing and outer fabric. Unpick the facing, replace, and resew.
Invisible zippers
Use an invisible zipper foot, sewing in the groove beside the coil.
Shortening a zipper
For coil zippers, sew a bar tack across the teeth at the new length, then cut below it.
Presser feet
Our presser feet page lists zipper feet and sets we checked.
What sewers ask us
Can I fix a zipper without replacing it?
If the teeth are intact and only the slider is loose, a new slider or squeezing the slider gently with pliers may fix it.
What length of zipper should I buy?
The same length as the old one. Measure the teeth, not the tape. A longer zipper can be shortened.
Which foot do I need?
A zipper foot, which lets the needle sew close to the teeth. An invisible zipper foot for invisible zippers.
How do I replace a jeans zipper?
Unpick the waistband ends and fly, replace the zipper with a metal jeans zipper, and resew with topstitching thread.
Last reviewed