Shortening pants is a matter of measuring carefully and sewing a neat hem.
1. Pin the new length
Put the pants on with the shoes you will wear. Fold up the hem at the front and back and pin it to the right length. Check in a mirror, standing straight.
2. Measure and mark
Take the pants off. Measure the folded amount from the existing hem at several points, and mark the new hemline evenly all around both legs with chalk — see measuring and marking. Use a seam gauge.
3. Remove the old hem
Unpick the old hem with a seam ripper and press out the crease.
4. Cut
Cut, leaving a hem allowance below the new hemline:
- Dress pants: about 1 1/2 to 2 inches.
- Casual pants: about 1 inch.
- Jeans: a narrow double-fold hem.
5. Finish the edge
Finish the raw edge with a zigzag or serger — see how to finish a seam without a serger.
6. Press the hem up
Press the hem up along the new hemline.
7. Sew
- Dress pants: a blind hem — see how to sew a blind hem — or by hand.
- Casual pants: topstitch with a straight stitch.
- Jeans: see how to hem jeans and keep the original hem.
Use the free arm.
Tapered legs
On tapered legs, the hem allowance is wider than the leg at the hem. Taper the side seams slightly at the hem, or ease the allowance in.
Cuffs
For cuffed pants, allow extra for the cuff and fold it up before hemming.
Hem allowance from an existing hem
If the pants are only slightly too long, you may not need to cut: let down or take up the existing hem allowance. Check the original crease, which may show on dark fabrics; steam and a damp cloth reduce it.
Pressing
Press the finished hem with a pressing cloth — see pressing versus ironing.
Common problems
- Uneven length: measure both legs at several points.
- Visible blind hem: catch less of the fold.
- Hem twists: cut off grain.
Related
See how to sew a hem.
What sewers ask us
How long should pants be?
It depends on the style and shoes. Dress pants often just touch the top of the shoe at the front.
How deep should the hem be?
About 1 1/2 to 2 inches for dress pants, less for casual pants and jeans.
Can I keep the original hem on jeans?
Yes. Fold up the excess and sew just above the original hem band.
Should both legs be the same length?
Usually, but measure both, since people are often slightly different.
Last reviewed