A 32-stitch Singer heavy-duty machine with a 6 mm stitch width, drop feed, an extension table and nine presser feet, including a non-stick and a straight-stitch foot.
Everything below is either a specification from the Amazon.com listing, cited as such, or our reading of what it means for your sewing.
What it is. A 32-stitch heavy-duty machine — 110 stitch applications in Singer’s counting — with a heavy-duty metal frame, a stainless steel bedplate, a top drop-in bobbin with a clear cover, a built-in needle threader, a one-step buttonhole and up to 1,100 stitches per minute. Two things set it apart from the 44-series: a 6 mm maximum stitch width and a drop feed lever for free-motion quilting and embroidery.
What is in the box. An extension table, a clearance plate, heavy-duty needles, four bobbins and nine feet: all-purpose, zipper, buttonhole, button sewing, Sew Easy, overcasting, blind hem, straight stitch and non-stick. That is close to everything a heavy-duty sewer buys in the first year.
The clearance plate, explained. When the presser foot reaches a thick seam, the front rises and the back stays low, so the foot tilts and the feed dogs lose their grip. The clearance plate sits under the back of the foot to level it, and the machine climbs the seam instead of stalling. It is the single best tool for jean hems — see sewing over thick denim seams.
Why drop feed matters here. With the feed dogs lowered and a darning foot, you can free-motion quilt, darn and thread-paint. On a heavy-duty machine, that turns a denim workhorse into a machine that also finishes small quilts — see why you would lower the feed dogs.
What it does not have. A speed limiter. Like the older Heavy Duty models, slow work depends on pedal control. Singer’s 6800C adds speed control with a computerized panel.
How it compares. Against the 4452 bundle, the 6380 adds width, drop feed and three more feet. Against the 6800C, it is mechanical and simpler. Our heavy-duty sewing machines page puts all of them side by side.
Where we would look before buying. The free arm with the table removed, if you sew sleeves and pant hems: check how quickly the table comes off and goes back.
What it does, and what it struggles with
Strengths
Nine feet and a clearance plate for climbing thick seams
6 mm stitch width and drop feed for free-motion work
It sits under the back of the presser foot when you approach a thick seam, so the foot stays level and climbs instead of stalling. It is the tool for jean hems.
6380 or 4452?
Both have 32 stitches and an extension table. The 6380 adds a 6 mm stitch width, drop feed, a clearance plate and more feet, including a straight-stitch foot and an overcasting foot.
What does the 6 mm width change?
Wider satin and decorative stitches and a wider zigzag for appliqué. For construction seams it changes little.
Is the Creativate app required?
No. It gives access to the manual, tutorials and troubleshooting; the machine works without it.
Our score
8.0/ 10
A complete box in the Singer heavy-duty range — buy it for the feet, the table and the drop feed.
The recorded price, among sewing machines
A reference exists on Amazon.com. Listed is not the same as in stock — availability changes daily.
Details checked on November 4, 2026.
Who buys this one, among sewing machines
Heavy-duty sewing with free-motion and quilting in the same machine
Amazon reports what buyers took in the month before this page was last checked: at least 100.
The figure is a floor, rounded by Amazon, and read through Keepa — it says what buyers picked, not what a maker claims.
Sources
Specifications: the manufacturer sheet for sewing machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Singer's best-known heavy-duty machine and one of the most-reviewed sewing machines on Amazon.com: 23 stitches, an automatic needle threader, a metal interior frame and up to 1,100 stitches per minute.
Best for: Jeans, canvas, bags and everyday sewing on one robust machine
23 stitches · DC motor · speed control · one-step buttonhole
The Next Evolution successor to the 4423: 23 stitches, a DC motor, speed control, a needle threader and a one-step buttonhole on Singer's full metal interior frame.
Best for: Anyone choosing a 4423 today who wants slow-speed control
Singer's computerized heavy-duty machine: an LCD panel, speed control, a thread cutter, a tie-off button, nine one-step buttonholes and ten presser feet on a metal frame.
Best for: Garments and heavy fabric on one machine, with computerized convenience