Choose the stabilizer by how the fabric behaves. Stretchy fabrics need permanent support; stable ones need temporary support.
Cut-away
- Stays in the garment; you trim the excess.
- For knits and anything that stretches: T-shirts, sweatshirts, fleece — see how to embroider on a T-shirt.
- For dense designs that need long-term support.
- Fusible versions are easiest.
Tear-away
- Torn away after stitching.
- For stable wovens: cotton, denim, canvas, towels with topping — see Stitch-n-Tear.
- Not for knits: the design distorts once removed.
Water-soluble (wash-away)
- Dissolves in water.
- For sheers, lace, free-standing lace and items where no stabilizer may show.
Topping
- A thin water-soluble film on top of the fabric.
- For towels, fleece, velvet and pile fabrics, so stitches do not sink — see how to embroider on towels.
Adhesive (sticky)
- Hoop it alone, then press the fabric on.
- For items that are hard to hoop: caps, collars, small pieces — see how to embroider on a cap.
Weight
Light, medium and heavy weights exist. Two light layers are often better than one heavy one for dense designs.
Hooping
Hoop the stabilizer with the fabric, taut but not stretched — see how to hoop fabric properly.
Quick guide
- T-shirt: cut-away.
- Quilting cotton: tear-away.
- Towel: tear-away plus topping.
- Organza: wash-away.
- Cap: sticky tear-away.
Stabilizer as a test
If you are unsure, embroider a test on a scrap of the real fabric with the stabilizer you plan to use, wash it, and look again. A design that puckers or distorts after washing needed a firmer or permanent stabilizer.
Storing stabilizers
Keep water-soluble stabilizers in a sealed bag, since humidity makes them sticky or weak. Label rolls and sheets by type and weight; they look similar once out of the packaging.
Puckering
Puckering usually means too little stabilizer — see why does my machine embroidery pucker.
Related
See our embroidery supplies page.
What sewers ask us
Which stabilizer for T-shirts?
A cut-away stabilizer, ideally fusible, which supports the knit permanently.
Which stabilizer for towels?
Tear-away or wash-away underneath, with a water-soluble topping on top.
Can I use two layers?
Yes. Two light layers are often better than one heavy one for dense designs.
What is a sticky stabilizer?
An adhesive stabilizer you hoop alone, then press the fabric onto, for items hard to hoop.
Last reviewed