Skip to content

What are the different serger stitches for?

Each serger stitch has a job. The number refers to how many threads it uses.

Four-thread overlock

Two needles, two loopers. The standard serged seam: strong, stretchy, with a safety line from the second needle. Use it for most garment seams, especially knits.

Three-thread overlock

One needle, two loopers. Use the left needle for a wide stitch, the right for a narrow one. For edge finishing and light seams, with less bulk.

Two-thread overlock

One needle, one looper. A very light edge finish for sheer and fine fabrics, and a base for some flatlock stitches. Not all sergers have it; the Juki MO-654DE does.

Rolled hem

A narrow edge, rolled and wrapped in thread, for scarves, ruffles and sheer fabric — see how to do a rolled hem on a serger.

Flatlock

A seam pulled flat so the stitches lie on the surface — decorative, or a flat seam on activewear — see what is flatlocking.

Five-thread safety stitch

A chain stitch beside a three-thread overlock, for strong seams on wovens. Found on some higher-end sergers and combination machines — see do I need a five-thread serger.

Coverstitch

Not a serger stitch on standard sergers — see what is a coverstitch.

Which to use

  • Knit seams: four-thread.
  • Woven seams: four-thread, or sew on a sewing machine and finish with three-thread.
  • Edge finishing: three-thread.
  • Sheer fabrics: two-thread or rolled hem.
  • Decorative edges: rolled hem with textured thread.

Changing stitches

Remove or add a needle and adjust tensions; many sergers show settings for each stitch on a chart inside the cover — see how to set serger tension.

Thread for each stitch

Use serger thread on cones for all positions; textured nylon in the loopers for rolled hems and soft edges on swimwear and baby clothes.

See our sergers page.

What sewers ask us

Which serger stitch is strongest?

The four-thread overlock, or a five-thread safety stitch on machines that have it.

When do I use a three-thread stitch?

For edge finishing and light seams, with less bulk than four threads.

What is a two-thread stitch for?

Finishing light and sheer fabric with minimal bulk. Not all sergers have it.

What is flatlocking?

A seam pulled flat so the stitches lie on the surface, used decoratively and on activewear.

Last reviewed