Skip to content

Juki MO-654DE review

Juki's long-running home serger: 2, 3 or 4 threads, an automatic rolled hem, a breakaway lower looper, a dedicated knife drive, 1,500 stitches per minute and a cover safety switch.

Where this settles A proven, fast, well-built serger — the step up from the Brother 1034D when you want 2-thread and an automatic rolled hem.

Photo : Richard Burlton, Unsplash

Everything below is either a specification from the Amazon.com listing, cited as such, or our reading of what it means for your sewing.

What Juki states. A 2-, 3- or 4-thread serger with an automatic rolled hem, color-coded threading with a breakaway looper, external adjustment for stitch length and differential feed, a powerful knife system with its own drive, a maximum speed of 1,500 stitches per minute, a maximum stitch length of 4 mm, a differential feed ratio of 0.7 to 2.0, and a safety switch that stops the machine when the swing cover is open. It sews light to heavy fabric.

What the numbers mean. A 0.7 to 2.0 differential feed range covers both ends of the problem: below 1.0 stretches fine fabrics slightly so they do not pucker, above 1.0 eases knits so they do not wave — see what differential feed is. An automatic rolled hem means switching to a rolled hem without changing the needle plate. A dedicated knife drive helps the knife cut cleanly through heavier fabric.

The record. More than 1,200 owner ratings on Amazon.com, averaging above four and a half stars — a long record for a serger in this price band.

What the listing leaves out. The feet and accessories in the box, and any lower looper threader. The breakaway looper makes the lower looper easier to reach, but it is not an automatic threader — see how to thread a serger.

Against the alternatives. The Brother 1034D has a lower looper threader, but no 2-thread stitch or automatic rolled hem. Juki’s MO-50E is the cheaper Juki with lay-in tensions.

Where we would look before buying. Needles: check the system in the manual before stocking up — see can I use regular needles in a serger. Our sergers page ranks the rest.

What it does, and what it struggles with

Strengths

  • Fastest serger we rank, at 1,500 stitches per minute
  • Automatic rolled hem and 2-thread capability
  • Over 1,200 owner ratings averaging above four and a half stars

Compromises

  • Very brief listing
  • No lower looper threader listed

Specifications

TypeSerger (overlock), 2, 3 or 4 thread
Maximum speed1,500 stitches per minute
Rolled hemAutomatic
ThreadingColor coded, breakaway looper
KnifeDedicated knife drive mechanism
Maximum stitch length4 mm
Differential feed0.7 to 2.0
SafetyWill not run with the swing cover open

What sewers ask us

What is a breakaway looper?

A lower looper that swings out of the way to make threading it easier. It is not an automatic threader, but it helps.

Is 1,500 stitches per minute useful?

On long seams, it saves time. On curves and fine fabric you will sew far slower; speed is a ceiling, not a setting.

What does the safety switch do?

It stops the machine running while the swing cover is open, so fingers are clear of the loopers and knife.

MO-654DE or Brother 1034D?

The Juki adds 2-thread stitching, an automatic rolled hem and more speed; the Brother has a lower looper threader and a lower price.

Our score

8.3/ 10

A proven, fast, well-built serger — the step up from the Brother 1034D when you want 2-thread and an automatic rolled hem.

The recorded price, among sewing machines

A reference exists on Amazon.com. Listed is not the same as in stock — availability changes daily.

Details checked on November 4, 2026.

Who buys this one, among sewing machines

Knit garments and seam finishing for someone who wants Juki's stitch quality

Cited in our sewing machines guides

Sources

Specifications: the manufacturer sheet for sewing machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.

How we assess these sewing machines