Skip to content

Singer X5004-HD review

Singer's heavy-duty serger: 2-, 3- or 4-thread stitching, six stitch types, a heavy-duty metal frame, a cutting knife Singer says is 60% larger than standard, and 1,300 stitches per minute.

Where this settles The serger to choose over the Brother 1034D if you sew thick fabric or want 2-thread finishes.

Photo : David Trinks, Unsplash

Everything below is either a specification from the Amazon.com listing, cited as such, or our reading of what it means for your sewing.

What Singer states. 2-, 3- or 4-thread stitching with six stitch types, a heavy-duty metal frame, a cutting knife 60% larger than on standard sergers, adjustable differential feed and up to 1,300 stitches per minute. In the box: an all-purpose foot, tweezers, a spreader, needles, a screwdriver and four thread spool holders.

What the 2-thread capability adds. A light, flat edge finish on fine fabric and a flatter flatlock, with less thread and less bulk than 3- or 4-thread stitches. The spreader converts the upper looper for 2-thread work. The Brother 1034D, its main rival, has no 2-thread stitch.

The larger knife. On denim, fleece, upholstery and canvas, a knife that cuts cleanly is what stops the edge being chewed instead of trimmed — see why a serger chews the edge. Singer’s “60% larger” is against unnamed standard sergers; read it as a direction.

What the listing does not state. A lower looper threader, a stitch length range and the differential feed range. The 1034D lists its lower looper threader; here, threading information is limited to the box contents.

The record. More than 1,600 owner ratings on Amazon.com, averaging above four stars — a solid record, well short of the 1034D’s twelve thousand.

Where we would look before buying. The threading diagram, since threading is the main difficulty on any serger — see how to thread a serger. Our sergers page compares the alternatives.

What it does, and what it struggles with

Strengths

  • 2-thread capability, which the Brother 1034D lacks
  • Larger knife for thick fabrics
  • Metal frame

Compromises

  • Only one foot listed in the box
  • Fewer owner ratings than the Brother 1034D
  • 2-thread needs a converter setup — check the manual

Specifications

TypeSerger (overlock), 2, 3 or 4 thread
Stitch types6
Maximum speed1,300 stitches per minute
FrameHeavy-duty metal frame
Knife60% larger than standard sergers (Singer)
FeedAdjustable differential feed
In the boxAll-purpose foot, tweezers, spreader, needles, screwdriver, 4 spool holders

What sewers ask us

X5004-HD or Brother 1034D?

The Singer adds 2-thread stitching and a larger knife; the Brother has a lower looper threader, three feet and a much longer owner record.

What is a 2-thread stitch for?

A light edge finish on fine fabric and a flatter flatlock. It uses less thread and less bulk than 3- or 4-thread stitches.

Does the larger knife matter?

On thick fabric — denim, upholstery, fleece — a knife that cuts cleanly stops the edge being chewed rather than trimmed.

What is a spreader?

The small accessory used for 2-thread stitching; it converts the upper looper so it passes the thread without carrying its own.

Our score

8.0/ 10

The serger to choose over the Brother 1034D if you sew thick fabric or want 2-thread finishes.

The recorded price, among sewing machines

A reference exists on Amazon.com. Listed is not the same as in stock — availability changes daily.

Details checked on November 4, 2026.

Who buys this one, among sewing machines

Serging thick fabric and denim, with 2-thread finishes when needed

Cited in our sewing machines guides

Sources

Specifications: the manufacturer sheet for sewing machines and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.

How we assess these sewing machines