Skip to content

Why does my serged seam pull apart?

A serged seam that ladders has a loose needle thread.

What you see

Pull the two layers apart: if the needle thread forms a ladder, or the layers separate, that thread is too loose.

Which needle

  • On a four-thread stitch, usually the left needle, which forms the seam line.
  • On a three-thread stitch, the single needle.

The fix

  1. Rethread that needle with the presser foot raised, seating it in its tension disc — see how to thread a serger.
  2. Tighten its dial by about half a number.
  3. Test on a scrap and pull it again.

See how to set serger tension.

Four threads for strength

A three-thread seam has one needle line and is weaker. For seams under stress — side seams, crotch seams, knits — use four threads — see what are the different serger stitches.

Flatlock by accident

A very loose needle thread turns the seam into a flatlock, which is designed to pull flat — see what is flatlocking.

Knits

Knit seams stretch more. Tighten the needle slightly, and set differential feed so the seam does not wave — see what is differential feed.

Seam allowance

If the knife trims too much, the seam has too little fabric to hold. Check the cutting width.

Needle

A dull or wrong needle can skip stitches, which weakens the seam — see how to change a serger needle.

Securing the ends

Seam ends can unravel too — see how to secure a serged seam end.

Wovens

On wovens that fray, a serged seam alone may pull out under strain. Sew the seam with a sewing machine and serge the edge as a finish.

Testing the seam

After adjusting, serge a 6-inch test seam and pull it firmly across. The layers should stay together with only a slight gap, and no threads should form a ladder. Change one dial at a time and repeat until the seam holds.

Thread

Cheap serger thread can stretch and break. Good serger cones help — see serger parts.

See looking after a serger.

What sewers ask us

Which tension dial do I tighten?

The needle thread that forms the ladder, usually the left needle.

Is a three-thread seam weaker?

Yes. For seams under stress, a four-thread stitch is stronger.

Could threading be the cause?

Often. A needle thread outside its tension disc has no tension.

Why does it only happen on knits?

Knits stretch the seam more. Tighten the needle thread slightly and use differential feed.

Last reviewed