A serger that chews has knives that are not meeting cleanly.
1. Is the knife engaged?
Many sergers let you disengage or swing the upper knife out of the way. Check it is engaged — see can I serge without cutting.
2. Lint
Packed lint around the knives keeps them apart. Brush it out — see how to clean and oil a serger.
3. Feeding
Feed the fabric so the knife trims a little — about 1/8 inch. Too far left, and the knife cannot reach it.
4. Cutting width
Set the cutting width for the stitch, so the loopers meet at the cut edge — see how to set serger tension.
5. Fabric thickness
Very thick fabric can overwhelm the knife. Trim first, serge slowly — see how to serge thick fabric.
6. The knife
If the edge still chews, the upper knife is dull or nicked, often from a pin. Replace it — see how to replace a serger blade.
7. The needle
A dull needle drags fabric toward the knife unevenly. Fit a new one.
Never serge over pins
One pin can nick the knife permanently. Use clips or pin away from the edge.
Fine fabric
Fine fabric can be pushed rather than cut. Use a fresh needle and tissue — see how to serge fine or sheer fabric.
Knife height
After replacing a knife, set its height so the upper blade just overlaps the lower one at its lowest point.
Moving the knife
Some sergers let you adjust how far the knife sits from the needles, changing the cutting width. If the knife is set too far right, it trims less and the stitch overhangs the edge; set it so the loopers wrap the cut edge snugly.
How a clean cut looks
A clean edge is straight with no loose threads; the loopers wrap it neatly. Fuzzy, torn or uneven edges mean the knife is not cutting before the stitch forms.
Related
What sewers ask us
Why is my serger not cutting at all?
The knife is disengaged, or the fabric is fed too far left for the knife to reach.
How often should serger knives be replaced?
When they chew instead of cut. The upper knife wears faster.
Can a pin ruin the knife?
Yes. One pin can nick the upper knife permanently.
Can lint stop the knife cutting?
Yes. Packed lint keeps the knives apart.
Last reviewed