A dull serger knife chews the edge instead of cutting it. Replacing it is a simple job on most home sergers.
Is the knife really dull?
Before replacing it, check:
- A fresh needle of the right type — see how to change a serger needle.
- Correct threading and tension — see how to set serger tension.
- Lint packed around the knives — see how to clean and oil a serger.
If the edge is still chewed, ragged or not cut through, the knife is dull. See why does my serger chew the edge.
Which knife
Most home sergers have:
- A moving upper knife, which wears first.
- A fixed lower knife, harder and longer lasting.
Buy the blade by part number for your model, from the maker or a dealer.
Step by step
- Unplug the serger.
- Remove the threads if they are in the way.
- Open the front cover.
- Lower or disengage the upper knife, as the manual shows.
- Loosen the knife screw with the supplied screwdriver or hex key.
- Remove the old blade.
- Fit the new blade in the holder, as the manual shows.
- Set the height: the upper knife’s edge should just overlap the lower knife at its lowest point.
- Tighten the screw.
- Turn the handwheel by hand to check the knives meet cleanly.
Test
Rethread, close the cover, and serge a scrap. The edge should be cut cleanly.
Lower knife
Replacing the lower knife usually needs the upper knife to be removed first. Follow the manual, or ask a dealer.
Prevent damage
- Never serge over pins.
- Keep the knife area clean.
- Turn the knife off when serging without cutting — see can I serge without cutting.
Sergers we review
The Brother 1034D, Juki MO-654DE and Janome 8002D all have replaceable upper knives. See our sergers and serger parts pages.
How long a knife lasts
It depends on what you serge. Synthetic fabrics, denim and fabrics with metallic threads dull a knife faster than cotton. Many home sewers replace the upper knife only every few years; hitting a pin can ruin one in a second.
When to call a dealer
If the knives do not meet cleanly after replacement, or the serger skips stitches, take it to a dealer.
What sewers ask us
How do I know my serger blade is dull?
The edge is chewed, ragged or not cut through, even with a new needle and correct thread tension.
Which blade wears first?
On most home sergers, the moving upper knife. The lower knife is harder and lasts much longer.
Where do I buy a replacement blade?
From the manufacturer or a dealer, using the part number for your model.
Can I sharpen a serger blade?
Replacement is usually simpler and more reliable than sharpening at home.
Last reviewed