Skip to content

How do I do a rolled hem on a serger?

A rolled hem rolls the fabric edge under and wraps it in thread — the narrow, neat edge on scarves, ruffles, napkins and sheer garments.

Machines that do it

Most home sergers can sew a rolled hem. Some, such as the Juki MO-654DE, have an automatic rolled hem setting; others need a lever moved or a plate changed. The Brother 1034D has a built-in rolled hem. The manual shows how.

Set up

  1. Remove the left needle. A rolled hem uses the right needle only, for a narrow stitch.
  2. Engage the rolled hem setting: move the stitch finger lever, or change the needle plate or foot, as the manual says.
  3. Shorten the stitch length to about 1 to 1.5 mm, so the stitches cover the edge.
  4. Narrow the cutting width, if adjustable.
  5. Tighten the lower looper tension — this pulls the edge under and rolls it.
  6. Leave the upper looper at normal or slightly looser, so it wraps the edge.

Test

Sew a test on a scrap of the same fabric, on the same grain. Adjust:

  • Edge not rolling: tighten the lower looper.
  • Fabric showing through: shorten the stitch length.
  • Edge puckering: lengthen the stitch slightly or loosen the needle.
  • Threads looping off the edge: tighten the upper looper.

Sew the hem

Fabrics

  • Best: chiffon, georgette, organza, lawn, light knits.
  • Not suitable: thick fabric, which will not roll.

Thread

Serger thread works. Textured nylon thread in the upper looper fills in and covers the edge more fully. Our serger parts page lists threads we checked, such as Madeira Aerolock.

Lettuce edge

On knits, stretch the edge as you serge for a lettuce edge — a wavy, ruffled finish.

Going back to normal

Reverse the settings: refit the left needle, disengage the rolled hem setting, reset tensions and stitch length. Keep a note of both settings.

See how to set serger tension and how to serge fine or sheer fabric. A sewing machine can sew a narrow hem with a rolled hem foot, more slowly.

Maintenance

Rolled hems on sheer fabric need a sharp needle and sharp knives. Change the needle if it snags — see how to change a serger needle.

What sewers ask us

Which needle do I use for a rolled hem?

Usually the right needle only, for a narrow hem. Remove the left needle.

Why does my rolled hem not roll?

The lower looper tension is not tight enough, or the fabric is too thick. Tighten the lower looper and test on light fabric.

Which fabrics suit a rolled hem?

Light and sheer fabrics: chiffon, georgette, organza, lawn and light knits. Thick fabric will not roll.

What thread works best?

Serger thread works; a textured nylon thread in the upper looper gives fuller coverage.

Last reviewed