It depends on how the seam will be pressed and whether you might need to adjust the fit.
Seams pressed open
Serge each edge separately, then sew the seam with a sewing machine and press it open. Serging the edges first, on flat pieces, is often easier and neater.
Used on side seams of tailored pants, skirts and jackets.
Seams pressed to one side
Sew the seam first, then serge both allowances together, and press to one side. Common on shirts, casual garments and children’s clothes.
Serging the seam itself
On knits and many casual garments, use a four-thread overlock to sew and finish the seam in one pass — see what are the different serger stitches.
Fit first
Serging trims the edge, so you lose seam allowance. Baste and fit before serging seams you might need to adjust — see what is a basting stitch.
Before or after: a checklist
- Woven, pressed open → serge edges first.
- Woven, pressed to one side → sew, then serge together.
- Knit → serge the seam itself.
- Fitting uncertain → sew, fit, then serge.
Pressing serged seams
Press serged seams flat as sewn, then to one side, usually toward the back of the garment. Avoid pressing them open: the overlock stitches hold the two layers together and would pull. On thick fabrics, press with a cloth so the serging does not show through.
Wovens with a serger only
On wovens, a four-thread serged seam is fine for casual items; for tailored garments, sew with a sewing machine and serge to finish.
Curves and corners
See how to serge a curve or corner.
Speed versus control
Serging a seam in one pass is fast but leaves little room for error. On a first project, sewing seams with the sewing machine and serging the edges afterward is slower but more forgiving.
No serger?
Finish with a zigzag or overcast stitch — see how to finish a seam without a serger.
Related
What sewers ask us
Should I serge before sewing the seam?
For seams pressed open, serging each edge first is often easier.
Can a serger sew the seam itself?
Yes, especially on knits, with a four-thread overlock.
Why serge after fitting?
Serging trims the edge, so you lose seam allowance for adjustments.
Which seams should not be serged together?
Seams that will be pressed open, and those you may need to let out.
Last reviewed